MOM5 Power Distribution Module

MOM5 Power Distribution Module

•  Multi-output Power Supply
•  12/24vdc 2.5 Amp
•  Ul Recognized
•  Five Outputs

MOM5 - Multi Output Power Distribution
Module for Access Control

Overview:
The MOM5 multi output power distribution module converts one (1) non-power limited DC voltage input to five (5) power limited outputs. Each output will route power to a variety of access control hardware and devices which includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc... These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay will enable HVAC Shutdown, Elevator Recall or trigger auxiliary devices.

Specifications:

• NFPA72 compliant.
• Class 2 Rated outputs.
• 12VDC or 24VDC operation.
• Five (5) individual PTC protected power limited outputs.
• Current limit is 2 amp @ 12VDC or 24VDC per output.
• Fire Alarm Panel or Access Control System trigger inputs (NO or NC supervised trigger input and polarity reversal trigger input).
• Red LED’s indicate condition of each power output.
• Power & input trigger LED’s.

• Power fail supervision relay (Form “C” contact rated 1 amp @ 28VDC).
• Output relay indicates that unit is triggered (Form “C” contact rated 1 amp @ 28VDC).
• Interfaces with most DC Power Supplies.
• UL Recognized for use with AL300ULX, AL400ULX, AL600ULX, AL1012ULX & AL1024ULX Power Supplies.

Board Dimensions (approximate):

5.25”L x 3.5”W x 1”H