B-155 Soap Dispenser
Description
Liquidmate Soap Dispenser, Chrome Bracket, 24 fl. oz. Corrosion-resistant valve dispenses thin, free-flowing commercially marketed all-purpose hand soaps. Bright polished chrome-plated ABS mounting bracket. Translucent polyethylene container provides visible soap level. Capacity: 24-fl oz (0.7-L). Valve operates with less than 5 lb of force (22.2 N).
MATERIALS:
Bracket and Collar — Bright polished chrome-plated ABS.
Container — Translucent, shatter-resistant polyethylene. Capacity: 24 fl oz (0.7 L).
Valve — Grey ABS with stainless steel spring. Corrosion-resistant.
OPERATION:
Push valve up to dispense measured amount of thin, free-flowing commercially marketed all-purpose hand soaps. Valve operates
with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with
barrier-free accessibility guidelines (including ADAAG in U.S.A.). Only after the collar is unscrewed at base of unit can the valve be
removed from the container for filling. Translucent container provides visible soap level.
INSTALLATION:
Secure dispenser to the wall with four sheet-metal screws, furnished by manufacturer, at points indicated by an S. Unit can also be
secured to mirror or glass surface with adhesive mounting kit, available as an optional accessor y: order Bobrick Part No. 190-40.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal
screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or
provide 1/8" (3mm) toggle bolts or expansion bolts.
Note: Provide 1-1/4" (32mm) minimum clearance from cap to underside of any horizontal projection. Valve should be located 44"
(1120mm) maximum above the finish floor.
SPECIFICATION:
Soap dispenser shall have bright polished chrome-plated ABS bracket and collar. Corrosion-resistant valve shall dispense thin, freeflowing
commercially marketed all-purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds of force
(22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Container shall be translucent, shatterresistant
polyethylene with a capacity of 24 fl oz (0.7 L).
MATERIALS:
Bracket and Collar — Bright polished chrome-plated ABS.
Container — Translucent, shatter-resistant polyethylene. Capacity: 24 fl oz (0.7 L).
Valve — Grey ABS with stainless steel spring. Corrosion-resistant.
OPERATION:
Push valve up to dispense measured amount of thin, free-flowing commercially marketed all-purpose hand soaps. Valve operates
with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with
barrier-free accessibility guidelines (including ADAAG in U.S.A.). Only after the collar is unscrewed at base of unit can the valve be
removed from the container for filling. Translucent container provides visible soap level.
INSTALLATION:
Secure dispenser to the wall with four sheet-metal screws, furnished by manufacturer, at points indicated by an S. Unit can also be
secured to mirror or glass surface with adhesive mounting kit, available as an optional accessor y: order Bobrick Part No. 190-40.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal
screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or
provide 1/8" (3mm) toggle bolts or expansion bolts.
Note: Provide 1-1/4" (32mm) minimum clearance from cap to underside of any horizontal projection. Valve should be located 44"
(1120mm) maximum above the finish floor.
SPECIFICATION:
Soap dispenser shall have bright polished chrome-plated ABS bracket and collar. Corrosion-resistant valve shall dispense thin, freeflowing
commercially marketed all-purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds of force
(22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Container shall be translucent, shatterresistant
polyethylene with a capacity of 24 fl oz (0.7 L).
| **Bobrick Ordering Notes**
We ship most Bobrick items from the factory directly to you. This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country. This does have a drawback, however. Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum. |
| US Builder Supply Notes
This site lists items most commonly ordered. We also stock many odds and ends, but in small quantities only and don't list them here. Feel free to call if you need an item you don't see. |