B-270 Sanitary Napkin Disposal

Sanitary Napkin Disposal, Stainless Steel - Contura Series - Surface Mounted Satin-finish stainless steel.

Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge.

Patented.

MATERIALS:
Container — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Integral finger depression for opening cover. Front of container has same degree of arc as front of cover and other Bobrick
Contura Series washroom accessories. Radius on side edges of container match corners and edges of cover and other
Contura Series accessories.
Cover — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front
of cover has same degree of arc as front of container and other Bobrick Contura Series washroom accessories. Radius on
corners and edges of cover match side edges of container and other Contura Series accessories. Secured to container with a
full-length stainless steel piano-hinge.
OPERATION:
Cover flips up for disposal of sanitary napkins and for servicing container. Disposable paper liners for the container are
available as an optional accessory: order Bobrick Part No. 270-12.
INSTALLATION:
For partitions with particle-board or other solid core, secure with two #8 x 3/4'' (4.2 x 19mm) sheet-metal screws (not
furnished) at all points indicated by an S, or provide through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are
installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle
bolts or expansion bolts.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws.
SPECIFICATION:
Surface-mounted sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Front of sanitary napkin disposal shall have same degree of arc and match other Bobrick Contura™
Series accessories in the washroom. Radius on corners and edges of sanitary napkin disposal shall complement other
Bobrick Contura™ Series washroom accessories. Cover shall be drawn, one-piece, seamless construction and secured to
container with a full-length stainless steel piano-hinge. Container shall have integral finger depression for opening cover.

 

**Bobrick Ordering Notes** We ship most Bobrick items from the factory directly to you.  This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country.  This does have a drawback, however.  Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum.

 

 

US Builder Supply Notes This site lists items most commonly ordered.  We also stock many odds and ends, but in small quantities only and don't list them here.  Feel free to call if you need an item you don't see.