B-287 Folding Shelf

Folding Utility Shelf

Satin-finish stainless steel.

Easily installed on toilet partition or wall.

Pull-down shelf returns to upright position when not in use.

Shelf: 14-1/2" long, 5-3/4" wide (370 x 145mm).

Patented.

MATERIALS:
Shelf — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Equipped with heavy-duty internal spring.
Mounting Bracket — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish.
OPERATION:
Shelf automatically returns to upright position when object is removed. Toilet compartment door cannot be opened when
shelf is in use.
INSTALLATION:
Mount unit on wall or toilet partition adjacent to latch side of compartment door with two sheet-metal screws, locknuts, and
washers, furnished by manufacturer, at points indicated by an S.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure unit with sheet-metal screws furnished or provide throughbolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which furnished sheet-metal screws can
be secured. If two units are installed back-to-back, provide threaded sleeves and machine screws for the full thickness of
partition.
Note: Provide 5" (125mm) minimum clearance from the inside surface of toilet compartment door to the front edge of shelf
to allow door to swing open and close. Provide 14-7/8" (380mm) minimum clearance above the mounting screw holes to the
underside of any horizontal projection.

 

**Bobrick Ordering Notes** We ship most Bobrick items from the factory directly to you.  This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country.  This does have a drawback, however.  Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum.

 

 

US Builder Supply Notes This site lists items most commonly ordered.  We also stock many odds and ends, but in small quantities only and don't list them here.  Feel free to call if you need an item you don't see.