B-3644 Waste Receptacle
Waste Receptacle for 4'' Wall - Recessed, 12 gallons
| Satin-finish stainless steel. |
| Seamless beveled flange. |
| Removable, 12-gal. (45.4-L) receptacle locks into cabinet. |
| Hooks hold optional vinyl liner. |
| Reusable Heavy-Gauge Vinyl Liner: Order Part No. 3944-12. |
MATERIALS:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construction.
Waste Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Front and side edges of bottom and
all top edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom
accessories. Equipped with interior hooks for optional vinyl liner. Capacity: 12-gal. (45.4-L).
OPERATION:
To empty waste receptacle, unlock with key provided. Liner cannot be removed unless waste receptacle is unlocked from
cabinet. Reusable vinyl liners are available as an optional accessory: order Bobrick Part No. 3944-12.
After unit is in use, if greater capacity waste receptacle is needed, an 18-gal. (68.1-L) capacity waste container can be
substituted; order Bobrick Part No. 368-12 Waste Receptacle and Part No. 368-16 Vinyl Liner.
INSTALLATION:
Provide framed rough wall opening 16" wide x 29-1/4" high (405 x 745mm). Minimum recessed depth required to finish face
of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with
shims between framing and cabinet at all points indicated by an S, then secure unit with sheet-metal screws (not furnished).
SPECIFICATION:
Recessed waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin
finish. Flange shall be drawn and beveled, one-piece, seamless construction. Removable waste receptacle shall be secured to
cabinet with a tumbler lock keyed like other Bobrick washroom accessories, have front and side edges of bottom and all top
edges hemmed for safe handling, and shall have a minimum capacity of 12-gal. (45.4-L).
| **Bobrick Ordering Notes**
We ship most Bobrick items from the factory directly to you. This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country. This does have a drawback, however. Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum. |
| US Builder Supply Notes
This site lists items most commonly ordered. We also stock many odds and ends, but in small quantities only and don't list them here. Feel free to call if you need an item you don't see. |