B-40 Soap Dispenser
Description
Soap Dispenser, 2-Tone Black/Grey ABS, 40 fl. oz. Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Two-tone styling in black and grey. Vandal-resistant lid has unique keyless locking device; lid pivots up after lock is disengaged for easy top filling. Large-capacity, translucent container provides visible soap level. Capacity: 40-fl oz (1.2-L). Concealed wall fastening; unit is removable from wall for cleaning. Valve operates with less than 5 lb of force (22.2 N).
MATERIAL:
Valve — Grey, high-impact-resistant ABS push button and spout. Soap head-holding mushroom valve. Stainless steel spring. U-packing seal
and duckbill.
Wall Bracket — Grey, high-impact-resistant ABS. Equipped with a concealed locking device to secure the lid and a removable plastic key
to disengage locking device.
Container — Black, translucent ABS. Capacity: 40 fl oz (1.2 L).
Lid — Grey, high-impact-resistant ABS.
OPERATION:
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve is operable with one hand, without tight
grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility
guidelines (including ADAAG in U.S.A.). Large-capacity, translucent container provides visible soap level. To fill container, use the plastic
key provided or any small pointed object to push in the concealed locking device located at upper left side of wall bracket; lid will
automatically pop forward. Lid swings up to top fill only after lock is disengaged. After filling, swing lid down and push it toward the wall; a
click sound confirms lid is locked. Soap container is removable for maintenance or replacement by opening the lid, pushing back on the
container stop spring tab and sliding the container up off the wall bracket. Replace the lid before mounting the container onto the wall
bracket.
INSTALLATION:
Remove plastic key from wall bracket. Provide (3) #10 x 1-1/2" (M5 x 38mm) mounting screws to mount the wall bracket on wall at points
indicated by an S. For plaster or dr y wall construction, provide concealed backing to comply with local building codes, then secure unit
with screws. For other wall surfaces, provide fiber plugs or expansion shields with screws, or provide 1/8" (3mm) toggle bolts or
expansion bolts. For mirrors or glass surfaces, use pressure-sensitive tape strips furnished by manufacturer: apply tape to back of wall
bracket within outlined areas; press wall bracket onto glass surface; then allow the tape to set 24 hours before mounting the container and
filling with soap. Hold lid upright in-line with wall bracket and slide its two pivot points into upper left and right slots of wall bracket; a click
sound will be heard when lid is properly in place. With lid in the upright (open) position, slide container down into the wall bracket’s Vshaped
groove. Swing lid down and push it toward the wall; a click sound confirms lid is locked.
Note: Provide 4" (100mm) minimum clearance from lid to underside of any horizontal projection for top filling and 5" (125mm) minimum
clearance to the left of unit for disengaging the concealed locking device. Push buttons should be located 44" (1120mm) maximum above
the finish floor.
SPECIFICATION:
Soap dispenser shall have grey, high-impact-resistant ABS wall bracket, lid, push button, and spout. Bracket shall be equipped with a locking
device to secure lid, container, and a removable plastic key to disengage locking device. Vandal-resistant lid shall pivot up for top filling only
after lock is disengaged. Corrosion-resistant valve shall have soap head-holding mushroom valve, stainless steel spring, U-packing seal, and
duckbill; and shall dispense commercially marketed all purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds
of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Container shall be black, translucent ABS
with a capacity of 40 fl oz (1.2 L), be retained to the wall bracket by a sliding latch and a container stop spring tab and shall be removable for
maintenance or replacement.
MATERIAL:
Valve — Grey, high-impact-resistant ABS push button and spout. Soap head-holding mushroom valve. Stainless steel spring. U-packing seal
and duckbill.
Wall Bracket — Grey, high-impact-resistant ABS. Equipped with a concealed locking device to secure the lid and a removable plastic key
to disengage locking device.
Container — Black, translucent ABS. Capacity: 40 fl oz (1.2 L).
Lid — Grey, high-impact-resistant ABS.
OPERATION:
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve is operable with one hand, without tight
grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility
guidelines (including ADAAG in U.S.A.). Large-capacity, translucent container provides visible soap level. To fill container, use the plastic
key provided or any small pointed object to push in the concealed locking device located at upper left side of wall bracket; lid will
automatically pop forward. Lid swings up to top fill only after lock is disengaged. After filling, swing lid down and push it toward the wall; a
click sound confirms lid is locked. Soap container is removable for maintenance or replacement by opening the lid, pushing back on the
container stop spring tab and sliding the container up off the wall bracket. Replace the lid before mounting the container onto the wall
bracket.
INSTALLATION:
Remove plastic key from wall bracket. Provide (3) #10 x 1-1/2" (M5 x 38mm) mounting screws to mount the wall bracket on wall at points
indicated by an S. For plaster or dr y wall construction, provide concealed backing to comply with local building codes, then secure unit
with screws. For other wall surfaces, provide fiber plugs or expansion shields with screws, or provide 1/8" (3mm) toggle bolts or
expansion bolts. For mirrors or glass surfaces, use pressure-sensitive tape strips furnished by manufacturer: apply tape to back of wall
bracket within outlined areas; press wall bracket onto glass surface; then allow the tape to set 24 hours before mounting the container and
filling with soap. Hold lid upright in-line with wall bracket and slide its two pivot points into upper left and right slots of wall bracket; a click
sound will be heard when lid is properly in place. With lid in the upright (open) position, slide container down into the wall bracket’s Vshaped
groove. Swing lid down and push it toward the wall; a click sound confirms lid is locked.
Note: Provide 4" (100mm) minimum clearance from lid to underside of any horizontal projection for top filling and 5" (125mm) minimum
clearance to the left of unit for disengaging the concealed locking device. Push buttons should be located 44" (1120mm) maximum above
the finish floor.
SPECIFICATION:
Soap dispenser shall have grey, high-impact-resistant ABS wall bracket, lid, push button, and spout. Bracket shall be equipped with a locking
device to secure lid, container, and a removable plastic key to disengage locking device. Vandal-resistant lid shall pivot up for top filling only
after lock is disengaged. Corrosion-resistant valve shall have soap head-holding mushroom valve, stainless steel spring, U-packing seal, and
duckbill; and shall dispense commercially marketed all purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds
of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Container shall be black, translucent ABS
with a capacity of 40 fl oz (1.2 L), be retained to the wall bracket by a sliding latch and a container stop spring tab and shall be removable for
maintenance or replacement.
| **Bobrick Ordering Notes**
We ship most Bobrick items from the factory directly to you. This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country. This does have a drawback, however. Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum. |
| US Builder Supply Notes
This site lists items most commonly ordered. We also stock many odds and ends, but in small quantities only and don't list them here. Feel free to call if you need an item you don't see. |