B-4112 Soap Dispenser

Soap Dispenser, All-Purpose Valve, Contura Series, 40 fl. oz. Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Container is satin-finish stainless steel. Capacity: 40-fl oz (1.2-L). Soap refill window. Concealed wall fastening; hinged filler top requires special key to open. Vandal-resistant. Valve operates with less than 5 lb of force (22.2 N).

MATERIALS:
Container — Body is 18-8 S, type-304, 20-gauge (1.0mm) stainless steel with satin finish. Drawn, one-piece, seamless
construction. Front has same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and
edges complement other ConturaSeries accessories. Back plate is 22-gauge (0.8mm) stainless steel with 20-gauge (1.0mm)
stainless steel mounting bracket attached. Container body and back plate are epoxy-sealed to prevent warping and leakage.
Concealed wall plate is 20-gauge (1.0mm) stainless steel. Equipped with a plastic soap refill-indicator window and a locked,
hinged stainless steel lid for top filling. Capacity: 40-fl oz (1.2-L).
Valve — Black molded plastic push button. Soap head-holding mushroom valve. Stainless steel spring. U-packing seal and
duckbill. Antibacterial-soap-resistant plastic cylinder.
OPERATION:
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve operates with one hand, without
tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free
accessibility guidelines (including ADAAG in U.S.A.). Window indicates when refill is required. The locked, hinged lid opens
for top filling with special key provided. Concealed, vandal-resistant mounting.
INSTALLATION:
Secure wall plate to the wall with screws furnished at points indicated by an S. Slide mounting bracket of container down
onto wall plate and secure unit with furnished locking-screw. For plaster or dr y wall construction, provide concealed backing
to comply with local building codes, then secure unit with screws furnished. For other wall surfaces, provide fiber plugs or
expansion shields for use with screws furnished, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
Note: Surface-mount the dispenser plumb and true with valve 6'' (152mm) to right or left of lavatory center. Provide 4''
(102mm) minimum clearance from the lid to the underside of any horizontal projection. Push buttons should be located 44"
(1120mm) maximum above the finish floor.
SPECIFICATION:
Surface-mounted soap dispenser shall be type-304 stainless steel with satin finish. Corrosion-resistant valve shall dispense
commercially marketed all-purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds of force
(22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Front of soap dispenser shall have
same degree of arc and match other Bobrick ConturaSeries™ accessories in the washroom. Radius on corners and edges of
soap dispenser shall complement other Bobrick ConturaSeries™ washroom accessories. Container body and back plate shall be
epoxy-sealed to prevent warping and leakage. Soap dispenser shall have concealed, vandal-resistant mounting. Locked, hinged
stainless steel lid for top filling shall require special key to open. Capacity shall be 40-fl oz (1.2-L).

 

**Bobrick Ordering Notes** We ship most Bobrick items from the factory directly to you.  This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country.  This does have a drawback, however.  Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum.

 

 

US Builder Supply Notes This site lists items most commonly ordered.  We also stock many odds and ends, but in small quantities only and don't list them here.  Feel free to call if you need an item you don't see.