B-505 Specimen Pass-Thru

Specimen Pass-Thru Cabinet

Satin-finish stainless steel.

Provides convenient passage for specimen from patient area to laboratory.

Self-closing doors.

Interlocking mechanism prevents both doors from being open at the same time; provides sight barrier.

Removable stainless steel tray.

Mounts in walls 3" to 5-3/4" (75-145mm) thick.

MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Two slots located on top and bottom for mounting.
Flanges (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construction. One mounting tab with screw hole located on top and bottom.
Doors (2) — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Each door is spring-loaded and secured to
cabinet with a full-length stainless steel piano-hinge. Doors equipped with cast-aluminum pull knob, interlocking mechanism,
and international graphic symbol identifying specimen cabinet.
Spillage Tray — 18-8 S, type-304, 24-gauge (0.6mm) stainless steel. All-welded construction.
OPERATION:
Interlocking mechanism on self-closing doors prevent both doors from being open at the same time; provides sight-barrier
for complete privacy. Spillage tray is easily removed for cleaning.
INSTALLATION:
Provide framed rough wall opening 11-1/2" wide x 10-7/8" high (290 x 275mm). Wall thickness may be from 3" to 5-3/4" (75
to 145mm). Allow clearance for construction features that may protrude into rough wall opening. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. Slide one flange onto cabinet so that screw holes in mounting tabs
are aligned with mounting holes in cabinet. Center cabinet in wall opening. Slide second flange into place, aligning tabs with
mounting holes and making certain entire perimeter of both flanges are tight against wall surface. Open one door and secure
unit with four #10 x 1/4" (4.8 x 6.4mm) mounting screws (not furnished) through cabinet mounting holes and flange tabs at
points indicated by an S.
SPECIFICATION:
Specimen pass-thru cabinet shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin
finish. Flanges shall be drawn and beveled, one-piece, seamless construction. Spring-loaded doors shall be self-closing and
secured to cabinet with a full-length stainless steel piano-hinge. Doors shall be equipped with interlocking mechanism to
prevent both from being open at the same time, providing sight-barrier for complete privacy. International graphic
symbol on doors shall identify specimen cabinet. Unit shall be furnished with a removable stainless steel spillage tray.

 

**Bobrick Ordering Notes** We ship most Bobrick items from the factory directly to you.  This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country.  This does have a drawback, however.  Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum.

 

 

US Builder Supply Notes This site lists items most commonly ordered.  We also stock many odds and ends, but in small quantities only and don't list them here.  Feel free to call if you need an item you don't see.