B-822 Soap Dispenser
Description
Lavatory Mounted Soap Dispenser. Top-filling design for ease of maintenance and labor savings. Vandal-resistant locking cover and free-turning spout. Corrosion-resistant. Bright-polished 4" (100mm) spout, cover and escutcheon. Impact-resistant ABS body and shank; shatter-resistant polyethylene container. Capacity: 34-fl oz (1.0-L). Maximum mounting thickness: 4" (100mm).
MATERIALS:
Piston, Spout, and Top Cover — Type-304 stainless steel with bright polished finish.
Cover Spacer — Rigid, impact-resistant polyester.
Escutcheon — Chrome-plated, high-impact-resistant ABS with bright polished finish. Concealed locking mechanism.
Body and Shank — High-impact-resistant plastic.
Valve — ABS cylinder. Stainless steel spring. U-packing seal and duckbills.
Container — Translucent, shatter-resistant polyethylene. Capacity: 34-fl oz (1.0-L).
OPERATION:
Press piston down to dispense commercially marketed all purpose hand soaps. Vandal-resistant spout can rotate 360° without
damage to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fill from
top, unlock cover and remove piston, spout, and supply-tube assembly. Unit may also be filled by removing container from below
lavatory.
Designer's Note: Bobrick liquid soap dispensers are designed to dispense commercially marketed all purpose hand soaps including
liquid and lotion soaps, synthetic detergents, and antibacterial soaps containing PCMX and/or Triclosan.
INSTALLATION:
Unit is designed for installation in 1'' (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as
well as in counter tops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned
when lavatory is ordered from manufacturer (specify punching location). Shank accommodates maximum 4'' (100mm) mounting
thickness and can be cut in the field. Clearance required for container diameter is 3-3/8'' (85mm).
SPECIFICATION:
Lavatory-mounted soap dispenser shall dispense commercially marketed all-purpose hand soaps. Piston and spout assembly shall
be type-304 stainless steel with bright polished finish. Spout shall rotate 360° without damage to valve mechanism. Escutcheon
shall lock to body with concealed locking mechanism that is opened with special key provided. Piston, spout, and supply-tube
assembly shall be removable from top for filling and maintenance. Valve shall be equipped with plastic cylinder, stainless steel
spring, U-packing seal, and duckbills. Shank shall accommodate mounting thicknesses up to 4'' (100mm). Translucent, shatterresistant
polyethylene container shall have a capacity of 34-fl oz (1.0-L).
MATERIALS:
Piston, Spout, and Top Cover — Type-304 stainless steel with bright polished finish.
Cover Spacer — Rigid, impact-resistant polyester.
Escutcheon — Chrome-plated, high-impact-resistant ABS with bright polished finish. Concealed locking mechanism.
Body and Shank — High-impact-resistant plastic.
Valve — ABS cylinder. Stainless steel spring. U-packing seal and duckbills.
Container — Translucent, shatter-resistant polyethylene. Capacity: 34-fl oz (1.0-L).
OPERATION:
Press piston down to dispense commercially marketed all purpose hand soaps. Vandal-resistant spout can rotate 360° without
damage to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fill from
top, unlock cover and remove piston, spout, and supply-tube assembly. Unit may also be filled by removing container from below
lavatory.
Designer's Note: Bobrick liquid soap dispensers are designed to dispense commercially marketed all purpose hand soaps including
liquid and lotion soaps, synthetic detergents, and antibacterial soaps containing PCMX and/or Triclosan.
INSTALLATION:
Unit is designed for installation in 1'' (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as
well as in counter tops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned
when lavatory is ordered from manufacturer (specify punching location). Shank accommodates maximum 4'' (100mm) mounting
thickness and can be cut in the field. Clearance required for container diameter is 3-3/8'' (85mm).
SPECIFICATION:
Lavatory-mounted soap dispenser shall dispense commercially marketed all-purpose hand soaps. Piston and spout assembly shall
be type-304 stainless steel with bright polished finish. Spout shall rotate 360° without damage to valve mechanism. Escutcheon
shall lock to body with concealed locking mechanism that is opened with special key provided. Piston, spout, and supply-tube
assembly shall be removable from top for filling and maintenance. Valve shall be equipped with plastic cylinder, stainless steel
spring, U-packing seal, and duckbills. Shank shall accommodate mounting thicknesses up to 4'' (100mm). Translucent, shatterresistant
polyethylene container shall have a capacity of 34-fl oz (1.0-L).
| **Bobrick Ordering Notes**
We ship most Bobrick items from the factory directly to you. This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country. This does have a drawback, however. Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00 We'll add this amount to your order if it is less than the $ 150.00 minimum. |
| US Builder Supply Notes
This site lists items most commonly ordered. We also stock many odds and ends, but in small quantities only and don't list them here. Feel free to call if you need an item you don't see. |