DUAL-INDEPENDENT

Dual Doors - Independent Operation

The two doors act as if they have their own power supply.

Using standard wire, the two doors should not be more than 100' apart, with the power supply placed in the middle.  This keeps the run to each door at 50' or less.  You may increase the distance by increasing the gauge of the wire. (learn more about access control)

Items Included in Package:

• Power Supply
• Battery Backup
• Dual Control Module
• Fire Alarm Interface Module
• 2 Indoor/Outdoor Keypads with 56 user codes and many available features
• 2 Mag Locks
• 2 Filler Plates for installing mag locks
• 2 Touch Bars for standard 36" wide door
• 2 Backup Push Buttons for inside of door
• Door Cord to tranfer power from frame to door

This system will exceed your expectations as it offers more features than are required for most applications.  The products selected are easy to install and each comes with it's own installation instructions.

The "brains" behind the system is the keypad.  It comes will all the standard features plus an alarm circuit and anti-tamper protection.  It may be flush mounted or surface mounted and may be used outdoors if not directly exposed to rain.

NOTE: If you have a high security application many of the same parts would be used.  The keypads would be swapped for high security versions and the mag locks are available with 1500 lbs holding force.  These high security parts are more expensive but readily available from stock.